userQuebster
| 2017-08-15 2nd-4th Pull, E30ish, WMI, DO7 Nozzle 2nd-4th pull. 92 deg F ambient. E20-E30ish fuel blend with 93oct. Eurodyne Adj file with 28 PSI and 96 Octane settings. WMI with DO7 nozzle... seems to work pretty damn well. Little to none timing correction between all my logs.
|
2017-08-15 1st-3rd Pull, E30ish, WMI, DO7 Nozzle 92 deg F ambient. E20-E30ish fuel blend with 93oct. Eurodyne Adj file with 28 PSI and 96 Octane settings. WMI with DO7 nozzle... seems to work pretty damn well. Little to none timing correction between all my logs.
|
2017_06_22 2 Big Pulls This is 3 back-to-back pulls. It's about 80 degrees outside with a little over 70% humidity. 93 Octane fuel + E30 mix + 50/50 WMI.
Adj. Settings: 98 Oct 28 PSI. I did see my gauge tap 28 psi a couple times, but mostly was hanging around 25-26. I still feel that the PSI in the logs are low.
Pull 1 - 3000-6500 4th gear pull
Pull 2 - 3rd + 4th gear pull
Pull 3 - 2nd-5th gear pull
Looks pretty clean to me, but I didn't see timing advance past 11.62.
|
Meth Test 01 Just a quick half-assed 3/4 throttle pull testing out my progressive meth controller. IAT dropped down to ambient, I'd say it's working!
|